Installation Procedures

Installation Instructions

Decals:

Choose your Surface: PicsNPrints printed decals will stick to most clean flat surfaces and even some textured surfaces. For freshly painted walls allow a 4 week drying period.

Clean Wall:  Use a warm, damp cloth or sponge to clean the wall surface or window and allow it to completely dry.  You can remove and replace the PhotoTex multiple times, however, once the adhesive collects too much dust, dirt or fibres it will become less effective and PhotoTex may not stick as well to your surface.

Installation:  Depending on the size of your decal, it may be helpful to have two people install it.  Gently rub over the surface of the sticker with a soft cloth or the back of your hand from the centre outwards, pushing out any air bubbles.  If there are any bubbles or wrinkles, you can lightly press or smooth them out, or just peel back that area and re-apply.

To Take Them Down:  To remove, carefully lift a corner and whilst folding the sticker back on itself, slowly peel off. Our wall stickers shouldn't damage your wall, but it's important to be careful when removing in case the wall has been poorly prepared before painting. If you are concerned, or if the wall offers resistance, heat with a hairdryer while removing. The backing paper is a good place to store your stickers.

Warning  wall stickers are designed for decoration only and are not to be considered as a toy. Please ensure that they are out of reach of children under 3 years of age, especially children in a cot, crib or bed to avoid a possible choking hazard.

Reboard Prints / Brushed Aluminium Prints / Magnetic Sets:

We use and recommend 3M Command Brand Medium White Adhesive Picture Hanging Strips – No Nails – No Damage which remove cleanly from your wall.  You are then able to easily move them to another position or even another house!!  These can be bought from Bunnings and other stores throughout Australia.

Simply attach to the back of your print or magnetic board.  Then either measuring and marking your wall or, alternatively using a spirit level to ensure you are putting them on straight.

It’s that simple 😊